Monday, April 9, 2012

Book in the Mail

IMG_7578
I was so excited to get the mail recently and see that I had a large envelope with Romanian stamps and post mark on it.  I had ordered a quilt book from my internet friend Geta Grama, and it had just been released by C&T Publishing.  Geta writes the blog Geta’s Quilting Studio and sells her patterns and book on her website Romanian Quilt Studio and is so clever and talented.   It is available here in the US too since it is published by CNT Publishing so check out your local quilt shop, Amazon.com or Barns & Noble.
IMG_7579Inside the envelope were two pieces of cardboard tied with a very colorful ribbon….more excitement as I untied the knot for my first peek at the book.IMG_7580Yes… it is the book on doing the fantastic shadow quilting with a different twist that Geta has perfected using batting, organza and cotton fabric.  Geta’s  designs are so beautiful.  She gives very good instructions in her book to achieve the same results….a very pretty book and lots of patterns to make these designs too.  I just counted and if I am correct, I counted 31 patterns that need to be enlarged on a copy machine or scanner or better yet you can choose to insert the enclosed DVD that has PDF files with the full sized designs ready to print out.

I am so excited for Geta with the the release of her first book.  I am sure it will be a great success too!  Take a look on her website and check out her other patterns for quilts, purses/bags and boxes while you are there.  I was one of the tester’s for her Ameile bag pattern and it is still one of my favorite bags to use and you know I have made a quite a few fabric bags. She has great instructions with lots of stepped out instructions for that bag too.  I wrote about it here on this post and and you can see what fabrics I chose.

Best of luck Geta on this new book!

Until Later,
Lynn

Wednesday, April 4, 2012

Basket Panel–Bobbin Work

The topic of this blog post is on doing bobbin work on the flowers, leaves, stems and basket handle.  First I am posting the after photo of the bobbin work so you can see what I did to the panel.  Just click on the photo to get a larger version you can see the detail.  (Sorry this photo is a little odd as the fabric was laying on the floor so the photo was taken at an angle.)  Keep reading if you want to know how I did the bobbin work.
IMG_4126-2To start, I pinned the water soluble stabilizer I had on hand to the back of the flower area then used the sewing machine to baste around the edge and in a grid across it to hold it in place.  I would tell you what brand it was but don’t know as the label was gone.  I do think any of the paper like water soluble stabilizers will work though.IMG_3979
Next I needed to get the position and shape of each flower, leaf, etc. transferred to this white interfacing.  I didn’t want to mess with getting out my light box so just taped the sandwich to the window. IMG_3982
I used the FriXion marker to trace the outlines on the white interfacing and any other marks I wanted to stitch with bobbin work.  This marker made a bright enough mark to see and heat will make it disappear.  I have heard that the marks from these markers have been known to come back if the piece gets cold but since this will be then inside of my quilt it just won’t matter.IMG_3984
I wound bobbins with the 6 strand DMC embroidery floss for my bobbin work.  Not a lot of floss will fit on each bobbin since it was so thick so had to fill bobbins pretty often.  The top thread I chose matched the floss I was using for each part….green top thread with green floss, blue top thread with blue floss, etc.   Matching the thread makes it invisible if it pops to the top.

I used a free motion foot on top and the second bobbin case I own for this machine in the bottom.  I purchased the second bobbin case so I could adjust the tension on it when ever I wanted for heavier threads and keep the other bobbin case for regular threads.  The tension screw had to be loosened quite a bit for this thick thread.  I do have a tip for anyone doing adjustments on the screw on their bobbin cases.  Put the bobbin case in a small plastic bag and do the adjustments while it is in the bag.  From personal experience if that itty bitty screw comes out and drops or flies away you will have a dickens of a time finding it.  The plastic bag will at least contain it.  Another tip – if you do happen to loose it on the floor take all the pins off your magnetic pin cushion and pat the floor in systematic rows and you might be lucky enough to find it…I found mine that way once.

I started stitching following the lines on the stabilizer pulling the floss to the backside which is actually the side that is up when you are stitching bobbin work.  Confusing I know, but remember the floss will be stitched to the front of the panel so the top thread is stitching on the back.  It is hard to stitch and not know what it will look like until you turn it over but that is what you have to do.  Try to make even sized stitches so the bobbin stitches will look nice when you are done…not an easy task but that is the goal. At the end of a line of stitching leave long tails on both threads and pull or using a large eyed needle bring the floss tail to the back.  I tied the tails together to secure them on the back then trimmed the tails.
IMG_3994 IMG_3991
IMG_3989
IMG_3997IMG_3998
I really like the texture this adds to the panel.  I have never done bobbin work on anything but a sample when I took a class one time.  I think the hardest part was keeping the stitches fairly even and not to stop moving my hands while the needle was still moving.  That is a sure way to make a lumpy spot in the bobbin stitching and of course those places had to be all ripped out and done over.  I tried to start and stop in the same spot so no one would be able to spot the starts and stops where lines had to be joined.  I still have a lot to learn to make my bobbin stitching perfect but I like my first real attempt.
I want to use this technique again as it was fun and sure adds a lot to the printed flowers, etc. on this panel.

Until Later,
Lynn

Monday, April 2, 2012

Guild Challenge 2012

I know I said I wasn’t going to show you my guild challenge quilt until after we had our May meeting but think there might only be one gal that checks my blog and she stopped in one day and it was laying right where she could see it.  If there are any other of my guild members reading this you can just not be surprised and look at the blog posts on this subject or just pretend you have not seen my challenge when I unveil it.

Here are the rules for this year’s guild challenge called Panel Magic.  Before I list the rules I will explain what a challenge is for those that don’t know.  Each year our quilt guild has a challenge to make a quilt following a set of rules.  These rules change from year to year and sometimes the challenge requires a certain fabric be used too.  Challenges are optional and you can choose whether you want to do it or not.   When I get a chance to dig out my old newsletters I will share some of the other guild challenges we have had in previous years with you. (I have kept every newsletter since we started the guild over 20 years ago and if I can locate the rules I will share them…I know I am a pack rat!)  The challenge is usually geared to make the members stretch their skills and imagination and maybe for them to try something new.  My friend and I volunteered to be in charge of the challenge so we made up the rules and will oversee the unveiling in May – not too tough a job.

OK, now for the rules.
1.  Choose at least one pre-printed panel for this challenge.  this panel can be a large panel, block sized panels or stripe like panels.
2.  You need to choose one or more other quilt fabrics to use on the front of the challenge piece.
3.  you must do more than just quilt and bind your panel.  Examples:  cutting apart and adding other fabric, embellishments, applique, thread work, piecework, etc.
4.  It can be either hand or machine quilted and must include a label on the back.
5.  Keep your challenge a secret until the May meeting where they will be unveiled.
6.  To receive your challenge gift, the challenge must be complete – quilted, bound, and labeled by the May meeting.
7.  Have Fun!!!

As you see they are pretty open ended and everyone should be able to do what they want.  A lot of quilters don’t know what to do with those pretty pre-printed panels so thought this would be a good challenge.
 
This is the panel I chose to work with for this challenge.  I purchased it in Paducah last spring at the AQS show and two panels came in the one cut so have a before and after version.  I say after, but even though I started my challenge last fall it is still not finished, but am hoping to get it finished this week or the next as there is not that much left to do.  IMG_4127I didn’t like the basket being so tall so cut the panel and took out some of the length and seamed it together matching the black diamonds printed on the basket and the outside edges where the basket meets the black background.  You can hardly tell the seam is there now.  I pressed the seam open to distribute the bulk and make the seam more invisible.
IMG_4145  IMG_4144
Here is a photo of the two panels side by side after I shortened the basket on the one.  Didn’t think to take a photo of the shortened basket until after I did some other things to it but that discussion will have to wait until another day as I don’t have time to get the photos sized and everything written up today.  I should have tacked them up on my design wall or another wall to get a straight on photo but was lazy and just laid them on the floor.  You can still see the difference, right? 
IMG_4126
To me the flowers are more the center piece of the panel after I shortened it and the basket takes center stage when it is so tall.  What do you think?  Did I improve it by shortening it or should I have left it the same?  Too late to do anything about it but would still like your opinions.

We are deep into our early spring weather here and now our apple tree is blooming, again a month earlier than it normally does.  I have been trying to get last years debris cleaned out of my flower beds and get ready to spread the soybean mulch like I did last year.  I wrote about it on the June 11, 2011 post.  This year John bought some bales of soybean stems and leaves from a neighbor and had it ground when he ground hay for the cows.  I have a huge pile to use.  I really like the way the mulch behaved last year and with the strong winds we get here in Nebraska the one thing I wanted was a mulch that didn’t blow around out of the beds and the soybean mulch stayed put.  I do need to add more to the beds this year as it does break down and decay but that is just adding nutrients to the soil.

I finally have both new computers working (I think) the way I like them and all the programs loaded on them.  What a job!  Guess there are a few things I need to tweak or research how to set before I am completely done though.  They both work great but I would much rather keep working on something I already know how to use than take the time to learn something new.  I can do it but it just takes so much time.

Will be posting several blog entries about the making of this challenge quilt so please come back to check it out.

Until Later,
Lynn

LinkWithin

Related Posts Plugin for WordPress, Blogger...