Wednesday, July 6, 2011

Blue On Blue…Stitching It Together

Ready, Set….GO!  I started sewing the laid out Blue On Blue blocks together and it was going great…for a while anyway.

I knew I needed to orient the blocks the correct way so the seams would nest together. IMG_3211 That was no problem, I flipped them all over so I could see the seams and every other row would be oriented either up or down.  I labeled the rows with pins very simply…one pin in the first block of row one, two pins in the second block of row one…etc. until about half of row one and two were stitched together then I moved on to row 3 and row 4 doing the same thing.





blue-on-blue-3The piecing was coming along fine until I looked at the finished section.  The plan was to look like this.
 
The partial pieced center that I had just pieced looked like the photo below.  Can you spot the difference?
IMG_3221
blue-on-blue-4Well, if you don’t see the mistake on my pieced rows look at this diagram and notice how the corners are like an X instead of a box.  This diagram is one I considered as a plan for this quilt but didn’t like the way the lattice looking thin strips looked in the corners so chose the design above to use instead.

How did that happen as I had the blocks all laid out upside down to look like they did when they were right side up?  Not sure but my first theory is that I laid the first two blocks together and stitched them together on the opposite side and I thought I was being so methodical with how I picked them up to take them into the sewing room to stitch.  Of course I wanted to be consistent so I wouldn’t make any mistakes and kept up the same technique with all the rest of the portion I happily stitched together.  In actuality the problem was I was picking up the blocks back side up and when I was stitching them together I flipped them over to lay them right side up with the rest of the blocks already stitched.  Going from back side to front side they needed to be flipped to line up correctly ... alas the problem.

PS
(Just looked at the part I stitched again...the first pairs were put together with the backsides up then I would flip them over to the right sides to put them in rows.  Since I had marked them with pins I knew which was the first, second, etc. I just lined them up accordingly.  So the blocks would be put together with the wrong vertical sides together.  If I would have kept sewing them together with the wrong side up I would have been fine.  Confusing....right?)

In the afternoon when I was going to join more blocks together I was standing admiring my work from the day before and realized they just didn’t look right.  I tried to convince myself it was OK and would leave it that way but after looking at the diagram I had made in that configuration I just didn’t like it, especially the way it looked with the border blocks.

What to do, what to do?  I hate ripping and didn’t want to rip that many blocks apart so decided to take the outside row from the right side of the quilt and move them to the left side of the quilt and added those blocks to get the design to be “correct”.  I again had to look them over and make sure there were no identical blocks too close together and moved a few around but I am never sure I have them all separated as I keep seeing blocks that need to be moved but am satisfied it is good enough now.

I stitched on the new blocks then had a couple of phone calls and friends stop in this afternoon so that is where it sits for now.  I am or was trying to stitch the blocks into 4 chunks that will be joined after they “chunks” are stitched rather than long rows as I don’t want to sew that many long rows together.  This top section will be a little larger than I had originally planned but it will be fine now that it looks like it is supposed to.

Still like the plan and turning the blocks seam side up on the floor was a good idea a friend suggested.  She made the same quilt and had problems with the seams and getting them to “nest”.  I also still like the idea of marking rows with pins but will definitely be more careful with how I pick up the blocks and may put one pin in the seams that are to be stitched  to remember which side to stitch from now on.  I am carrying several sets of blocks from my living room to the sewing room and back after they are pressed another idea that is working.

Well…maybe I will have more progress to show you later.
Lynn

1 comment:

Mary L. said...

Glad you were able to figure it out. I got dizzy reading but understand what was going on. LOL. Good solution!

LinkWithin

Related Posts Plugin for WordPress, Blogger...