Only read this on the original blog post as it has
been pirated. You will find a link on the right sidebar of my blog
http://nebraskaviews.blogspot.com
OK now for some hints and tips that I discovered while making the 10 stockings. The first hint is when deciding where to cut the fronts you need to watch where the rivets, belt loops, zipper or heavy jeans seams are. Your machine will have trouble with any of the metal (zipper or rivets) as needles will definitely break if you hit them. Same goes with the belt loops and heavy seams as some are so thick that needles have trouble piercing them.
Speaking of needles I have been using size 90 Superior titanium needles. They have worked well but I did break two when I hit heavy seams. I just hate it when that happens as I don't want to throw the timing off or mess something up in my machine. I was stitching very slowly too when I broke the needles.
When I had to cross a seam when I was doing the embroidery I used the seam leveler doodad that came with my machine. It is 3 riveted pieces of plastic that you slip under the side of the machine foot that is not lifted up by the seam. Helps to keep the stitching even going up over a seam or coming down.
Will post photos of the stockings in later posts so I don't get too many photos per post.
Lynn
Update: Here are the links to all the stocking blog posts.
Part 1 Christmas Stocking Fun
Part 2 Christmas Stocking Fun Part 2
Part 3 Christmas Stocking Tips
Part 4 Denim Jeans Christmas Stockings
Part 5 More Stocking Hints And Observations
Part 6 Two More Christmas Stockings
Part 7 Hanging The Stockings
Part 8 More Stockings To Show
Part 9 Another Jeans Stocking For The Fireplace
Part 10 Pattern
1 comment:
i have a question you cut the shape out then make toe and heel then you fuse these on the front and then stitch around it . i love it but i am a little slow at times when i see somethigng so cute and looks easy .thank you i hope i can make one i woul;d love to try it for christmas
Post a Comment